Centralized recycling all-in-one machine

1、 Equipment introduction

The main functions of the centralized recycling machine are as follows:

1. Clean the equipment and related parts in the lithium battery production line;

2. Recycle the lithium battery materials contained in the cleaned sewage (the recycled materials have great economic value);

3. Purify the cleaned sewage (the recovered clean water still needs to go through the industrial environmental protection sewage treatment system

Treatment) to reduce the pressure of the environmental protection sewage treatment system.

2、 Specific parameters

3、 Introduction to each component

1. Cleaning water tank: mainly used for parts cleaning, using ultrasonic wave to clean parts, and as a buffer area for sewage, to remove the sewage in the sewage tank

Water is pumped into the cleaning water tank;

2. Separation system: carry out preliminary separation of sewage, obtain lithium battery materials (micron particles) and carry out preliminary purification of sewage at the same time;

3. Filtration system: the clear liquid discharged from the separation system is filtered by filtration equipment to obtain relatively clean water, which can be directly cleaned and recycled

Use;

4. Oven: used to bake the lithium battery materials collected by the centrifuge to obtain slime with less water content;

5. Buffer water tank: the buffer water tank is used to temporarily store the clear liquid separated from the separation system and provide it for ultrafiltration for secondary filtration and purification;

6. Circulating water tank: The circulating water tank is used to store the purified water of the filtration system, and can be directly injected into the ultrasonic cleaning water tank to clean the parts.

4、 Schematic diagram of equipment operation process